【H3C培训】H3C MSR 20-11路由器配置Frame-relay、地址映射、地址池

　　COM口配置如下：

　　波特率：9600

　　数据位：8

　　奇偶校验：无

　　停止位：1

　　流控制：无

　　开机画面：

　　InitDDR

　　SDRAM TESTING....

　　Do you want to check SDRAM? Yes or No (Y/N):

　　system start booting......Version 1.18

　　Press CTRL+D to stop auto-boot

　　Booting Normal Extended BootRom

　　Decompressing...done!

　　Ensure the baudrate is set to 9600bps!Starting at 0xa00000...

　　*******************************************************

　　* *

　　* H3C MSR20-11 BOOTROM, Version 1.19 *

　　* *

　　*******************************************************

　　Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.

　　Compiled date: Jul 22 2008, 11:48:47

　　CPU type : MPC8323E

　　CPU L1 Cache : 16KB

　　CPU Clock Speed : 333MHz

　　Memory Type : DDR SDRAM

　　Memory Size : 256MB

　　Memory Speed : 266MHz

　　BootRom Size : 1024KB

　　CPLD Version is 1.00

　　HardWare Version is 3.00

　　Press Ctrl+B to enter extended boot menu...

　　The current starting file is main application file--flash:/main.bin!

　　The main application file is self-decompressing...

　　Decompressing...done!

　　………………………

　　...

　　id=0x1cfff000,proc=0x13c3dd0

　　It will take a long time to get configuration file, please wait...

　　Retrieving configuration file failed!

　　User interface aux0 is available.

　　Press ENTER to get started.

　　开始配置(命令行)如下：

　　

　　system-view

　　System View: return to User View with Ctrl+Z.

　　[H3C]sysname Xxx

　　[Xxx]nat address-group 1 144.16.72.54 144.16.72.86

　　[Xxx]telnet server enable

　　% Start Telnet server

　　[Xxx]ssh server enable

　　Info: Enable SSH server.

　　[Xxx]ftp server enable

　　[Xxx]acl number 2000 match-order auto

　　[Xxx-acl-basic-2000]rule permit source any

　　[Xxx-acl-basic-2000]quit

　　[Xxx]local-user huawei

　　New local user added.

　　[Xxx-luser-huawei]password cipher huawei

　　[Xxx-luser-huawei]service-type telnet

　　[Xxx-luser-huawei]service-type ssh

　　[Xxx-luser-huawei]service-type ftp

　　[Xxx-luser-huawei] authorization-attribute level 3

　　[Xxx-luser-huawei]quit

　　[Xxx]interface Ethernet0/0

　　[Xxx-Ethernet0/0]ip address172.28.21.254 255.255.255.0

　　[Xxx] port link-mode route

　　[Xxx] nat outbound

　　[Xxx-Ethernet0/0]quit

　　[Xxx]interface Serial0/0

　　[Xxx-Serial0/0]nat outbound 2000 address-group 1

　　[Xxx-Serial0/0]link-protocol fr

　　[Xxx-Serial0/0]fr map ip 144.16.129.190 104 ietf

　　[Xxx-Serial0/0]ip address 144.16.129.191 255.255.255.252

　　[Xxx-Serial0/0]quit

　　[Xxx]interface vlan1

　　[Xxx-Ethernet0/0]ip address 172.28.21.254 255.255.255.0

　　[Xxx-Ethernet0/0]quit

　　[Xxx]ip route-static 0.0.0.0 0.0.0.0 144.16.129.190

　　[Xxx]user-interface vty 0 4

　　[Xxx-ui-vty0-4]authentication-mode scheme

　　[Xxx-ui-vty0-4]quit