COM口配置如下:
波特率:9600
数据位:8
奇偶校验:无
停止位:1
流控制:无
开机画面:
InitDDR
SDRAM TESTING....
Do you want to check SDRAM? Yes or No (Y/N):
system start booting......Version 1.18
Press CTRL+D to stop auto-boot
Booting Normal Extended BootRom
Decompressing...done!
Ensure the baudrate is set to 9600bps!Starting at 0xa00000...
*******************************************************
* *
* H3C MSR20-11 BOOTROM, Version 1.19 *
* *
*******************************************************
Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Compiled date: Jul 22 2008, 11:48:47
CPU type : MPC8323E
CPU L1 Cache : 16KB
CPU Clock Speed : 333MHz
Memory Type : DDR SDRAM
Memory Size : 256MB
Memory Speed : 266MHz
BootRom Size : 1024KB
CPLD Version is 1.00
HardWare Version is 3.00
Press Ctrl+B to enter extended boot menu...
The current starting file is main application file--flash:/main.bin!
The main application file is self-decompressing...
Decompressing...done!
………………………
...
id=0x1cfff000,proc=0x13c3dd0
It will take a long time to get configuration file, please wait...
Retrieving configuration file failed!
User interface aux0 is available.
Press ENTER to get started.
开始配置(命令行)如下:
System View: return to User View with Ctrl+Z.
[H3C]sysname Xxx
[Xxx]nat address-group 1 144.16.72.54 144.16.72.86
[Xxx]telnet server enable
% Start Telnet server
[Xxx]ssh server enable
Info: Enable SSH server.
[Xxx]ftp server enable
[Xxx]acl number 2000 match-order auto
[Xxx-acl-basic-2000]rule permit source any
[Xxx-acl-basic-2000]quit
[Xxx]local-user huawei
New local user added.
[Xxx-luser-huawei]password cipher huawei
[Xxx-luser-huawei]service-type telnet
[Xxx-luser-huawei]service-type ssh
[Xxx-luser-huawei]service-type ftp
[Xxx-luser-huawei] authorization-attribute level 3
[Xxx-luser-huawei]quit
[Xxx]interface Ethernet0/0
[Xxx-Ethernet0/0]ip address172.28.21.254 255.255.255.0
[Xxx] port link-mode route
[Xxx] nat outbound
[Xxx-Ethernet0/0]quit
[Xxx]interface Serial0/0
[Xxx-Serial0/0]nat outbound 2000 address-group 1
[Xxx-Serial0/0]link-protocol fr
[Xxx-Serial0/0]fr map ip 144.16.129.190 104 ietf
[Xxx-Serial0/0]ip address 144.16.129.191 255.255.255.252
[Xxx-Serial0/0]quit
[Xxx]interface vlan1
[Xxx-Ethernet0/0]ip address 172.28.21.254 255.255.255.0
[Xxx-Ethernet0/0]quit
[Xxx]ip route-static 0.0.0.0 0.0.0.0 144.16.129.190
[Xxx]user-interface vty 0 4
[Xxx-ui-vty0-4]authentication-mode scheme
[Xxx-ui-vty0-4]quit
开班时间 | 班级类型 | 报名情况 |
---|
7月15日 |
H3CTE认证 |
热报中 |
7月8日 |
H3CSE培训 |
热报中 |
7月1日 |
H3CNE认证 |
热报中 |
8月19日 |
H3CTE认证 |
热报中 |
8月12日 |
H3CSE培训 |
热报中 |
8月5日 |
H3CNE培训 |
热报中 |
9月9日 |
H3CTE认证 |
热报中 |
9月2日 |
H3CSE认证 |
热报中 |
9月9日 |
H3CNE培训 |
热报中 |
7月22日 |
H3CIMC培训 |
热报中 |
7月15日 |
H3C无线培训 |
热报中 |
7月8日 |
H3CEAD培训 |
热报中 |
7月29日 |
H3CPME认证 |
热报中 |
7月22日 |
H3C安全认证 |
热报中 |
8月26日 |
H3CIMC培训 |
热报中 |
7月15日 |
H3C无线培训 |
热报中 |
7月8日 |
H3CEAD培训 |
热报中 |
8月26日 |
H3CPME认证 |
热报中 |
8月19日 |
H3C安全认证 |
热报中 |
9月23日 |
H3CIMC培训 |
热报中 |
9月23日 |
H3C无线培训 |
热报中 |
9月9日 |
H3CEAD培训 |
热报中 |
9月16日 |
H3CPME认证 |
热报中 |
9月23日 |
H3C安全认证 |
热报中 |
H3C培训 | H3C认证 | 西安金桥世纪 | H3C认证培训总代理 |
西安金桥世纪科技有限公司
版权所有 @ 2004-2011 西安金桥世纪科技有限公司 ICP备案号:京ICP备09013186号 网站备案号:京ICP备19057537号-1
地址:西安市锦业路都市之门D座1209室
邮编:710075
电话:029-89280300、87818627